Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Web interface to config PIX

IS there any web interface to config PIX??

Thx ^^

8 REPLIES
Cisco Employee

Re: Web interface to config PIX

Sure, PIX Device Manager (PDM) has been around for quite a while now. If you have a recent PIX the software should already be installed, especially on the 501/506 line. Do a "sho ver" and if the second line of output says "PIX Device Manager ...." then the software is already there.

If not, you can get the software from here:

http://www.cisco.com/cgi-bin/tablebuild.pl/pix

and read the install notes here:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pdm/index.htm

Have fun.

New Member

Re: Web interface to config PIX

Thx Reply

I check my PIX, PDM (1.1.2) has been installed before

but how to access it by web? ( After I read the note, I don't understand)

Thx ^^

New Member

Re: Web interface to config PIX

in your web browser "http://ip address of pix inside interface" or change inside interface to management interface if you have one. I would suggest upgrading the pix OS and PDM two different downloads.

New Member

Re: Web interface to config PIX

I have tried to https://Interal IP of PIX

but fail

I need to enable http?

> http server enable

THX

New Member

Re: Web interface to config PIX

The following commands should be issued.

http server enable

http (ip address of workstation pdm is to be used from) 255.255.255.255 inside

pdm location (ip address of workstation pdm is to be used from) 255.255.255.255 inside

That hoepfully should get you working.

New Member

Re: Web interface to config PIX

Thx!! It works now

pdm location (ip address of workstation pdm is to be used from) 255.255.255.255 inside <= what is that mean??

New Member

Re: Web interface to config PIX

In pdm 3.0(1) another command is added that is pdm location that addresses locations where pdm is available from. the mask 255.255.255.255 means only this address and only the inside interface.

New Member

Re: Web interface to config PIX

use https://

There is no auto-redirect to the secure page.

Jon

209
Views
0
Helpful
8
Replies
CreatePlease login to create content