Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Will these object-group cause override in CSM?

Hi Everyone,

Currently i can not make changes in live network to test the options below.

Say we have Fw1  with object group below

sh run object-group id Test

object-group network Test

network-object 10.0.0.0 255.0.0.0

network-object 172.16.0.0 255.240.0.0

network-object 192.168.0.0 255.255.0.0

Fw2 shows below

sh run object-group id Test

object-group network Test

network-object object 10.0.0.0

network-object object 172.16.0.0

network-object object 192.168.0.0

Will above cause overiide in CSM ver4.2?

Also if i have object group below on fw1

sh run object-group Test_all

object-group network Test_all

network-object host 192.168.50.0

Fw2 shows

sh run object-group Test_ALL

object-group network Test_all

network-object host 192.168.50.0

Will above also cause override as names are different?

Regards

Mahesh

478
Views
0
Helpful
0
Replies