cancelar
Mostrar resultados para 
Pesquisar em vez de 
Queria dizer: 
Comunicados
Bem-vindo à Comunidade de Suporte da Cisco, gostaríamos de ter seus comentários.

[Failure] Error: "SNMP request timed out [1.3.6.1.4.1.9.9.215.1.1.5.0]."

Good afternoon;

Please help me with a one doubts!

When attempting to insert a Cisco 2960 Switch on Cisco Clean Access Standard Manager we are getting a SNMP error message

We already reconfigured the equipment but the error persists. We replace the switch on the other, for increased resolution of the problem temporarily.

Other devices work normally. Only this occurs the SNMP Error, and the settings are the same.

Below is the error for better understanding:

[Failure] Error: "SNMP request timed out [1.3.6.1.4.1.9.9.215.1.1.5.0]."

Best Regards;

Fernando

References:

http://www.cisco.com/c/en/us/td/docs/security/nac/appliance/configuration_guide/49/cam/49cam-book/m_oob.html#wp1428660

SNMP Request Timed Out
Error: SNMP request timed out [1.3.6.1.4.1.9.9.215.1.1.5.0]

CAM logs contain the error as shown in the following example:

2012-01-08 18:41:57.010 +0530 [TP-Processor23] ERROR com.perfigo.wlan.web.sms.Switch                    
- switch [9.0.20.3] SNMP WRITE failed, 1 consecutive write failures!
2012-01-08 18:41:57.011 +0530 [TP-Processor23] ERROR com.perfigo.wlan.web.sms.SnmpManager
This error happens when there is a mismatch in the SNMP Write settings. When the admin clicks the ports for a switch, then this error is displayed in the CAM web console.

The SNMP Write settings setup in the device profile under OOB Management > Profiles > Device are different from the settings in the switch configuration. Make sure the settings are the same.

 

1 RESPOSTA

Hello Fernando,Have you

Hello Fernando,

Have you placed a packet capture (TCP Dump) on the CAM to identify the SNMP traffic sent by the SW?

Thanks,

108
Apresentações
0
Útil
1
Respostas
CriarFaça o para criar o conteúdo