Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

3825 not boot

Got a ' spared ' 3825 off our recently departed marketing guy.

Upon power apply, I can see the fans run but no Sys, Power LED on the pannel.

No console output .

No flash nor memory installed but I know the system should boot with some kind of error and flashing green.

Is there a default jumpers to reset if the system hung up ?

Or this baby gone with the l00pback interface ?

No smartnet for this baby.

Thanks for answering,

Loc P

4 REPLIES

Re: 3825 not boot

Hi

Are you sure about the installation of both Flash/DRAM on the router ??

Also did u try changing the baudrate on the console and checked up ??

regds

Community Member

Re: 3825 not boot

Until I can get it to boot, no, not really !

But I did try methodolotically, 1-b-1 all the baud rates. What discourage is LED not even light up.

Anyone have a snapshoot of the PS ?

Regards,

Loc

Re: 3825 not boot

i think you have a BAD motherboard. Raise an RMA

Narayan

Re: 3825 not boot

Have encountered similar issue with 6509 switch and 7513 router, after I sent them to site. I have to unplug and replug the modules (sup and rsp) before it kicked in, seems like lost contact during transport :)

206
Views
0
Helpful
4
Replies
CreatePlease to create content