4507R+SUPII_Plus Redundancy Problem

[sbjeong]

Dear Professionals

I have

4507R + 2 X SUPII_Plus + cat4000-i9s-mz.121-19.EW1.bin

Following dump seems to be not configured correctly to redundancy.

What can I do to fix this problem.

------------------ show running-config --------------

.....

!

redundancy

mode rpr

main-cpu

auto-sync startup-config

auto-sync standard

!

.....

-----------------------------------------------------

7507R_SUPII_Plus#show redundancy stat

my state = 13 -ACTIVE

peer state = 1 -DISABLED

Mode = Simplex

Unit = Primary

Unit ID = 1

Redundancy Mode (Operational) = RPR

Redundancy Mode (Configured) = RPR

Split Mode = Disabled

Manual Swact = Disabled Reason: Simplex mode

Communications = Down Reason: Simplex mode

client count = 4

client_notification_TMR = 60000 milliseconds

keep_alive TMR = 9000 milliseconds

keep_alive count = 0

keep_alive threshold = 18

RF debug mask = 0x0

7507R_SUPII_Plus#redundancy force-switchover

There is no STANDBY present. Failed to force switchover

Best Regards

[vkapoor5]

The problem is with the following missed commands in your global configuration... Assuming Active RSP in slot 2, Standby RSP in Slot 3 and both RSP's have Slot 0 flash memory cards.

R(config)#hw-module slot 2 image slot0:

R(config)#hw-module slot 3 image slot0:

R#hw-module sec-cpu reset

Refer the following links for more information...

http://www.cisco.com/en/US/products/sw/iosswrel/ps1612/products_feature_guide09186a0080080a6f.html

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/rte_swit/6586rsp8.htm#213565