Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

BGP Conditional Advertisement With 2 Subnets

Is it possible to trigger conditional advertisement of a Border Gateway Protocol (BGP) prefix based upon the non-existence of two subnets? I can only get this to work with one subnet.

My customer has parallel links to a provider (one BGP session).

The command reference mentions one subnet in the description of the non-exist-map.

Perhaps I should just identify one network from this Internet Service Provider (ISP) to focus on as the indicator of the failure.

1 REPLY
Anonymous
N/A

Re: BGP Conditional Advertisement With 2 Subnets

An IP address match is mandatory for a non-exist-map. The access-list specified should be a simple access-list and contains only one prefix. If the condition requires multiple prefixes, multiple access-list can be used, for example:

route-map ISP1-backbone permit 10

match ip address 2 3 4

531
Views
0
Helpful
1
Replies
CreatePlease to create content