Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

C200 server RAID-1 HDD Faulty

Dear Forum Users,

I have a C200 series server with RAID-1 configuration.

Currenlty 1 of the disks has failed. Disk model is ST3500514NS (500GB SATA disk). My question are:

1. Can i replace the disk with ST9500620NS (500GB SATA)?

2. If can, then the replacement is Hot-Swappable, whereby i remove faulty disk and insert new disk and Rebuild process will start?

Look forward to your comments

Regards,

Alisampras

Everyone's tags (2)
1 REPLY

C200 server RAID-1 HDD Faulty

Hello Mohamed,

1-Both disks are not compatible due to the form factor, one disk is 2.5" and the other 3.5"

ST9500620NS is PID "A03-D500GC3="   << 2.5" disk

ST3500514NS is PID "R200-D500GCSATA03"  << 3.5" disk

See this: 

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/spec_sheet_c17-644227.pdf

Keep in mind "R200-D500GCSATA03" is end of sale already.

2-Disk are hot swappable, all of them.  When there is faulty disk and you replace it, the rebuild process should begin automatically, however, udner some circumstances, the rebuild needs to be triggered manually.

Rate all helpful answers.

-Kenny

368
Views
0
Helpful
1
Replies
CreatePlease login to create content