02-09-2009 06:22 AM
The C3120X blade switch currently doesn't support the X2-10GE-LR (long-range, single mode fiber) module according to this documentation: http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html
1) Is future support planned (via software) or is it a hardware, asic reason why this interface isn't supported ?
2) What alternatives do i have to connect
these switches with single-mode fiber ?
regards,
Geert
Solved! Go to Solution.
02-09-2009 07:04 PM
Geert,
I did some digging and it appears the LR optic will be supported in the 3120X blade switches this March with the 12.2(50)SE software release. Hopefully this comes as good news.
Cheers,
Brad
02-09-2009 07:04 PM
Geert,
I did some digging and it appears the LR optic will be supported in the 3120X blade switches this March with the 12.2(50)SE software release. Hopefully this comes as good news.
Cheers,
Brad
02-10-2009 04:44 AM
That is indeed very good news ! thanks.
08-26-2009 10:11 AM
Hi, Brad.
Can I connect CBS 3130X to Nexus 5010 via 10G? thanks.
leo
09-02-2009 04:43 PM
Leo,
Absolutely, with fiber. You can use an X2 SR 10G optic in the 3130X, and an SR SFP+ optic in the Nexus 5010.
Cheers,
Brad
09-03-2009 03:30 AM
thanks, Brad.
Leo
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: