Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can't snmpwalk interface traffic for FC interfaces on Nexus 5596UP!

Hi folks,

I try to get interface traffic counter from FC-Interfaces via snmpwalk from my nexus 5596UP, NX-OS 7.0(1)N1(1). Without success.

Everything works for Ethernet interfaces:

 snmpwalk -v2c -c ****** n5-1-060-4 IFmib

.....

IF-MIB::ifName.436207616 = STRING: Ethernet1/1
IF-MIB::ifName.436211712 = STRING: Ethernet1/2
IF-MIB::ifName.436215808 = STRING: Ethernet1/3
IF-MIB::ifName.436219904 = STRING: Ethernet1/4

.....

 

but I don't see any FC-Interfaces (Yes, I have configured some FC-ints on 5596).

 

 

On the other hand I have success with snmpwalk from my "old" Nexus5020

version 5.2(1)N1(6):

 snmpwalk -v2c -c ****** n5-1-060-1 IFmib

...

IF-MIB::ifName.17301504 = STRING: fc2/1
IF-MIB::ifName.17305600 = STRING: fc2/2
IF-MIB::ifName.17309696 = STRING: fc2/3
IF-MIB::ifName.17313792 = STRING: fc2/4

....

IF-MIB::ifName.436207616 = STRING: Ethernet1/1
IF-MIB::ifName.436211712 = STRING: Ethernet1/2
IF-MIB::ifName.436215808 = STRING: Ethernet1/3
IF-MIB::ifName.436219904 = STRING: Ethernet1/4

 

Would appreciate if I could receive any hint ...

 

regards Thomas

Everyone's tags (1)
1 REPLY
New Member

Problem resolved, it was a

Problem resolved, it was a bug :

 

Cisco NX-OS Release 7.1(1)N1(1) Resolved Caveats

CSCup75270 FC interfaces are not listed in IF-MIB snmp walk

69
Views
0
Helpful
1
Replies
CreatePlease login to create content