We just received a 6513 with 2 Sup modules and 5 Gigabit switch modules. I wanna get to the web management of the 6513. I assigned an IP address to the default interface using the IOS commands but I still can not get to the web interface. I have looked all over the web on how to do this, but have not found anything.
Does anyone have documentation or a config example for how to setup the switch just enough to get to the web interface.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...