Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

cip to host

My 390 host connected with two cip card,Can I define the virtual mac of two cip as same,So I can implemted load balance. Like this:

interface Channel1/2

lan TokenRing 0

source-bridge 10 1 755

adapter 0 4000.0755.9026

lan TokenRing 1

source-bridge 10 1 755

adapter 1 4000.0755.9026

2 REPLIES
New Member

Re: cip to host

Certainly it is valid to define a duplicate MAC address on 2 separate virtual LAN's. To be on the safe side, I would make the SRB ring-number on the 2nd LAN unique, i.e. change '10' to '11' etc.:

lan TokenRing 1

source-bridge 11 1 755

adapter 1 4000.0755.9026

Obviously you need to define proper CSNA on channel1/0 ans 1/1, and activate the VTAM XCA's pertaining to adapters 0 and 1. All this will let you implemet load balancing...

Eli

New Member

Re: cip to host

thank you!

225
Views
0
Helpful
2
Replies
CreatePlease to create content