Cisco 3110 (VBS) and uplinks to Aggregation Switches
We are building an IBM Blade server environment. We basically have (2) IBM chassis's. Each chassis has a 3110 in bay 1, and bay 2.
We are using the VBS feature on the 3110's to virtualize the switches.
My questions is on the uplink's from the 3110's to the CAT6500's. In the connection examples that I have seen, they do not show any uplinks from the designated "Master" 3110 or the designated "Secondary Master" 3110. I have not been able to find any documentation that explains why there should not be any uplinks on these switches. Can someone provide the resoning for this or point me towards some documentation.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...