Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

Cisco 3130X switches and X2-10GB-LR

Does anyone know if the above X2 optics are definitely supported in the Cisco 3130X switches (Dell Blade switches)?

The compatibility matrix here suggests not; however, the later release notes do mention the X2-10GB-LR optics.

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html#wp55411

5 REPLIES
New Member

Re: Cisco 3130X switches and X2-10GB-LR

I'm not sure. I have never tried it, although the documentation does look like it it not supported. Another option might be the lx4 module. LX4 can handle up to 10km over SM (http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html)

New Member
Silver

Re: Cisco 3130X switches and X2-10GB-LR

Thanks for the info. I saw that posting too, but I am finding contradictory information. Good point about the -LX4 optic operating with SMF too; that could well be the alternative if -LR isn't supported on the C3130X.

New Member

Re: Cisco 3130X switches and X2-10GB-LR

I see what you mean. The release notes don't mention LR X2 support. I'll see if I can dig up an LR module tomorrow and test it out.

You could also try your SE.

New Member

Re: Cisco 3130X switches and X2-10GB-LR

according to our SE, it's supported and we already order 9 of them, just be careful to order to correct patch cord.

1163
Views
4
Helpful
5
Replies
CreatePlease to create content