Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CISCO C210-M2 raid with 1064e

Using the above setup can i use 4 disks, striping them togther in sets of two and then using one to mirror the orther. So I have Raid 0 and 1. I have only 2 disks at the moment but I will buy two more if I can do it.

Basicly I want the fasted mirrored raid I can on this machine.

Thanks

Jim Bray

Everyone's tags (3)
2 REPLIES
Cisco Employee

CISCO C210-M2 raid with 1064e

Hello Jim,

LSI 1064E controller does not support RAID 10 configuration.

http://www.cisco.com/en/US/partner/docs/unified_computing/ucs/c/hw/C210M1/install/RAID.html#wp1015386

HTH

Padma

Cisco Employee

CISCO C210-M2 raid with 1064e

LSI 1064E also support RAID 1E, which does mirroring and striping. However, you need at least 3 hard drives. It tolerates a single drive failure.

Otherwise, you can implement RAID 1 for redundancy in case of failure.

443
Views
0
Helpful
2
Replies