Cisco nexus 5596 + fex and connect other network device...
As Richard mention, its is not supported to connect any network device which can send/receive BPDU connected to the FEX ports. Even if you connect some of the network devices routers, F/W's and IPS devices, its still not supported. I had a recent TAC experience where we had some issues regarding the ASA/Router peering using the FEX ports and TAC made customer move all teh devices to 5K else they would not support the issue.
So the offcial statement is please do not connect anything except Hosts/Servers to your FEX ports.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...