Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configure Windows on UCs c22 M3 drives are not showing

hello all

i am configuring windows server 2008r2 on UCS c22 m3 , i have configured raid1 (default) virtual drive , drive is showing in BOOT order but when i install windows and it prompts to selct hard drive, there no drive are showing , do i need to install any driver for it? if yes then which version of driver i download, my CIMP version is 1.5(1k) kindly suggest me and help me in solving this issue.

 

 

 

  • Server Networking
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

You will have to install the

You will have to install the drivers for the RAID card that you are using. You will have to unmount  the windows ISO and mount the driver ISO to install the drivers. Then you will have to mount the windows ISO back

The driver package can be downloaded from the link below

http://software.cisco.com/download/release.html?mdfid=284444317&catid=282558030&softwareid=283853158&release=1.5(1d)&relind=AVAILABLE&rellifecycle=&reltype=latest

Thanks,
Karthic

HiUse the latest one for 1.5

Hi

Use the latest one for 1.5:

http://software.cisco.com/download/release.html?mdfid=284444317&flowid=33922&softwareid=283853158&release=1.5%284e%29&relind=AVAILABLE&rellifecycle=&reltype=latest

 

Always use this tool to confirm the driver/firmware you need to run:

http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

Rate ALL helpful answers

-Kenny

18 REPLIES
Cisco Employee

You will have to install the

You will have to install the drivers for the RAID card that you are using. You will have to unmount  the windows ISO and mount the driver ISO to install the drivers. Then you will have to mount the windows ISO back

The driver package can be downloaded from the link below

http://software.cisco.com/download/release.html?mdfid=284444317&catid=282558030&softwareid=283853158&release=1.5(1d)&relind=AVAILABLE&rellifecycle=&reltype=latest

Thanks,
Karthic

New Member

okalso tell me do i need to

ok

also tell me do i need to install driver version 1.5.1d or which version??

 

HiUse the latest one for 1.5

Hi

Use the latest one for 1.5:

http://software.cisco.com/download/release.html?mdfid=284444317&flowid=33922&softwareid=283853158&release=1.5%284e%29&relind=AVAILABLE&rellifecycle=&reltype=latest

 

Always use this tool to confirm the driver/firmware you need to run:

http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

Rate ALL helpful answers

-Kenny

New Member

Thanks for your valuable and

Thanks for your valuable and correct answers, let me download the driver and install it i will let you know if there is an issue regarding it.

 

thanks

 

New Member

dear all i have downloaded

dear all 

i have downloaded the latest driver for it 1.5.4 , but when i browse to driver in instaling windows i got error like "no driver found " kindly suggest me corect version or whats this error?

 

It may be that you are not

It may be that you are not choosing the right component.  Please share an screenshot....

 

-Kenny

New Member

ok currently i dont have its

ok currently i dont have its access, tomrrow i will share screenshot with you

 

 

New Member

attached is the screen shot

attached is the screen shot of the error and file i have selected.

 

 

New Member

one more thing sorry i did

one more thing sorry i did not tell you, i am trying to install windows on embedded controller not lsi mega raid controller card.

156
Views
0
Helpful
18
Replies