Re: Console into IBM BC mgmt module to manage it when you don't
To reset the IP address back to default, press and hold the IP reset button on the MM for 3 seconds or less.
If you want to reset back to factory default, press and hold the reset button for 5 seconds, release and wait 5 seconds, then press and hold for another 10. You should then be able to get in using the default IP address and "USERID" & "PASSW0RD" (all uppercase)
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...