What version of software are you running on your CSM?
I've had the real server ARP issues before, and that is really nothing to be worried about. It is more of an informative message. Are you experiencing issues with the gateway arp message relative to traffic being dropped or blackholed?
If not, it may just be more of an informative message than anything.
- First we moved the CSM to another Slot, the configuration was deleted and we configurated a very basic balancing configuration. The result was the arp?s failed and gateway failed. This ocurred few minutes after
- Second, we installed a new CSM on the same Cat6500. The result: al is working fine!!
We are going to report the Card as a fail HW to the service support in order to have a replacement.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...