Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Default Configuration Lines on Nexus 5000

What is the purpose of these  default configuration lines? What do they mean? I can't find an  explanation of them anywhere. I believe some are written to the config  when FCoE is enabled....

I would like to know exactly what they are doing.

I DO have an idea but I would like to have each line explained, one at a time, so that I can understand how Cisco implements PFC and ETS and how they identify system classes, etc....

class-map type qos class-fcoe

class-map type queuing class-fcoe

  match qos-group 1

class-map type queuing class-all-flood

  match qos-group 2

class-map type queuing class-ip-multicast

  match qos-group 2

class-map type network-qos class-fcoe

  match qos-group 1

class-map type network-qos class-all-flood

  match qos-group 2

class-map type network-qos class-ip-multicast

  match qos-group 2

system qos

  service-policy type qos input fcoe-default-in-policy

  service-policy type queuing input fcoe-default-in-policy

  service-policy type queuing output fcoe-default-out-policy

  service-policy type network-qos fcoe-default-nq-policy

371
Views
0
Helpful
0
Replies