Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DLSw - MSFC - Redundancy

Do all the same rules apply when doing Dlsw redundancy with backup msfc's? For example, do I need the following types of commands:

dlsw transparent redundancy-enable xxxx master-priority x

and

dlsw transparent map local-mac xxxx remote-mac xxxx neighbor xxxx

and

dlsw transparent switch-support

1 REPLY
New Member

Re: DLSw - MSFC - Redundancy

Yes.

You may want to look into Single Router Mode (SRM) at http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/redund.htm for your MSFC redundancy. You lose MSFC load balancing but simplify the configuration greatly since you don't need to use HSRP or DLSw Transparent Redundancy.

hope this helps

tim

191
Views
0
Helpful
1
Replies
CreatePlease login to create content