Re: DLSW use which tcp port to transmit and receive data.
It really depends on the vendor. RFC1795 defines TCP 2065 and 2067 for DLSw. However, Cisco routers only uses TCP 2065 in DLSw version 1 mode. Cisco routers support DLSw version 2 (RFC 2166) in 11.3T. If two Cisco routers with 12.0 software, Cisco routers use UDP 2067 on top of TCP port 2065.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...