Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does M81KR support SR-IOV?

Hello Gents,

I'm trying to deploy VM-FEX on MS 2012-server with MS Hyper-V according to http://www.cisco.com/en/US/products/ps10281/products_configuration_example09186a0080c1780d.shtml#anc2 which refers to 1225,1240 & 1280 VICs as those supporting mentioned deployment.

But when I associate  server to profile it gets into error of

<faultInst

ack="yes"

cause="configuration-failure"

changeSet=""

code="F0327"

created="2013-11-13T14:03:22"

descr="Service profile SR-IOV-4-MSHV configuration failed due to dynamic-vf-vnic,insufficient-resources"

dn="org-root/org-TEST-ORG-4-MSHV/ls-SR-IOV-4-MSHV/fault-F0327"

highestSeverity="major"

id="1340199"

lastTransition="2013-11-13T14:03:22"

lc=""

occur="1"

origSeverity="major"

prevSeverity="major"

rule="ls-server-config-failure"

severity="major"

status="created"

tags="server"

type="server">

</faultInst>

I inspected VICs and found it to be M81KR. Does above error appear due to unsupported VIC?

Thank U

1 REPLY
New Member

Does M81KR support SR-IOV?

Just checked via http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/vm_fex/hyperv/gui/config_guide/2.1/b_GUI_Hyper-V_VM-FEX_UCSM_Configuration_Guide.pdf

M81KR is supported.

In my profile dynamic vNIC pollicy defines only 12 interfaces... Any ideas about error's source?

817
Views
0
Helpful
1
Replies
CreatePlease login to create content