Re: DSLW Peers generating congestions over WAN links
What is the bandwidth of the link(s) to the remote sites?
DLSw may forward any LLC1 traffic (e.g. IPX, Appletalk, DEC, and so on) if the corresponding routing protocol is not enable. For example, if IPX routing is not enable on the router, DLSw transports any IPX frames it receives to the remote DLSw peers. This may cause peformance problem if the WAN link is relative small to the LLC1 traffic.
I suggest you to use "DLSw icanreach sap", "DLSw icanreach mac-address, or "DLSw icannotreach sap" to filter out unneccessary filter. "DLSw icanreach sap" and "DLSw icannotreach sap" filter traffic based on protocol. "DLSw icanreach mac-address" filter traffic based on MAC addresses.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...