I am just curious what other people are doing in this situation. We have 2 6509's for the server farm and I wanted to be able to connect a dual homed server to both switches for redundancy.
I know you can use the active/standby mode for Linux bond interfaces, but that only works if the link goes down or switch gets powered off. I was hoping for a more reliable way to provide fault tolerance.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...