I have these power supplies connected to 110/120v power strips. They are bringing in 220V for these routers. Can I connect the back-up power supply into the 220v with out hurting the power supply running on 110v, or do I need to shut down the router to make this swap? Both power supplies will be connected to the 220v and I do have the pigtails to attach them as well.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...