Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

E160D Host Upgrade Utility time out

I am trying to upgrade firmware on a UCS E160D by booting from a HUU-2.3.1.iso.  Server boots from ISO fine but eventually returns msg "Error Discovery Timed Out (Error Code 913).  this is a critical error and the host will reboot".  Server is currently running bios 1.5.0.2.  ISO is good as I have used it on numerous other servers.

3 REPLIES
New Member

Change the setting under Port

Change the setting under Port Properties. Check the Auto Negotiation option and restart CIMC once. It worked for me.

Click on Admin --> Network --> Network Settings --> Port Properties --> Auto Negotiations

New Member

This discussion has been

This discussion has been reposted from Additional Communities to the Server Networking community.

Cisco Employee

This issue is usually seen in

This issue is usually seen in instances where a remote upgrade it taken place via the KVM over long distances.

It is recommended that users be somewhat local when mapping images to the KVM. Example: same building same LAN as  CIMC

Regards,

-SK

548
Views
5
Helpful
3
Replies
CreatePlease to create content