We're looking at purchasing server and NAS connectivity for a new data center project. We're planning on buying a single NX7009 for the core and our VAR originally quoted us 3850s to use for server/NAS connectivity. But now I'm thinking of just using 2248s FEXs (cheaper) but my question is, can I create an EC between an edge port on one fex and an edge port on another to the end devices? As in the (crude) pic below. We're planning on getting
Sup2s with the 7k. I've seen some posts similar to this, but they all involved 2 7ks...
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...