Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

Enabling NPV on 5596UP

I  know enabling NPV on MDS switches erases FC configuration. I need  to  enable NPV on Nexus 5596UP and i just want to make sure when it  says  that enabling NPV will ease current running config that only applies to FC portion of the switch, it will not erase the Ethernet config.

Thank you

@dynamoxxx
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Enabling NPV on 5596UP

When you convert the switch to NPV mode, the full config is erased and required a reload.

HTH,

jerry

2 REPLIES
Cisco Employee

Enabling NPV on 5596UP

When you convert the switch to NPV mode, the full config is erased and required a reload.

HTH,

jerry

Silver

Enabling NPV on 5596UP

Ouch ...it is what it is i guess. Thanks Jerry

@dynamoxxx
434
Views
0
Helpful
2
Replies
CreatePlease login to create content