Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

error code F0207

Cisco UCS 5108 warning alarms generated in UCSM

code="F0207"

created="2013-10-04T08:30:32"

descr="Adapter  host interface 1/1/1/2 link state: down"

dn="sys/chassis-1/blade-1/adaptor-1/host-eth-2/fault-F0207"

highestSeverity="major"

id="410895"

6 REPLIES

Hello,Is this a server that

Hello,

Is this a server that was already working or this is happening during the association process?  What is the IOM model and blade model?

Could you please provide an screenshot of the IOMs backplane ports and Fabric ports?

Also, please provide an screenshot of BIOS, Adapter and CIMC firmware?

Last, what is the UCSM, Fabric Interconnects and IOMs firmware running?

 

 

-Kenny

New Member

Hi Kenny,

Hi Kenny,

I am hitting similiar issue and have tried re-acknowledging the blade but issue didnt fix.

Any idea what could cause the issue?

Infrastructure and blade upgrade was done from ver - 2.2(c) to 2.2(7B)

VIP Green

Can you please post the

Can you please post the screenshots Kenny was mentioning above !

New Member

Hi Walter,

Hi Walter,

Attach the screen capture.

VIP Green

Do I understand you correctly

Do I understand you correctly ? this happened after to upgrade to 2.2.7b ?

- did you manual or autoinstall ?

- do have blades that work ok, or are all blades in all chassis have this problem ?

- are the links from the fabric interconnect to the North bound switches up ?

- is the OS which shows this errors booted up ?

New Member

Hi Walter,

Hi Walter,

i have raised TAC case for this. Fix was to decommissioned the server so the UCSM cleared the information regarding this server and then recommissioned the server again.

998
Views
0
Helpful
6
Replies
CreatePlease to create content