Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Fabricpath CE dot1q trunk

If ruining fabricpath in a leaf, spine (vpc+ l2/l3 boundary) and l3 core design is it possible to breakout on a classical ethernet dot1q trunk from the spine to temporarily pass the fabricpath vlans to another site (catalyst only)?

4 REPLIES

Fabricpath CE dot1q trunk

Hi,

Yes this is possible, and indeed we're doing something very similar to what you're proposing.

We have Nexus 7K spine switches, which are also the L3 boundary running vPC+, and these are connected via standard IEEE 802.1Q trunks to standard STP capable switches.

The area to be mindful of is that a FabricPath CE (Classic Ethernet) ports behave as if running STP "root guard" and as such will become disabled if they receive a superior STP BPDU e.g., one with a lower priority. You'll see a SYSLOG message along the lines of %STP-2-L2GW_BACKBONE_BLOCK if this occurs.

There's more detail on this in the FabricPath Versus Classical Ethernet Networks section of the Cisco Nexus 5000 Series NX-OS Operations Guide.

The other document on FP that would be worth looking through is Mark Stinnette's Quick Start Guide :: FabricPath. This is a cook book style configuration guide, and some of the "recipes" shown deal with exactly this and need to ensure the FP domain is the STP root.

Regards

New Member

Fabricpath CE dot1q trunk

Hi Steve - Thanks for the reply, very helpful. I spoke with a guy from cisco @ netapp insight who also said this could be done. He told me to look up the slide deck from cisco live which has info on this when migrating from CE into DCB environment.

Just out of curiosity, what line cards do you terminate FP and then route north from? The info I have read states FP > Fxxx > fabric > Mxxx > route north.... However, I believe this can all be done on the F2e cards now?

Fabricpath CE dot1q trunk

Hi,

Our environments pretty old now so we're using the N7K-F132XP-15 for southbound FabricPath and the N7K-M108X2-12L for the northbound routed connections.

The F2E I/O module supports Layer-2 and Layer-3 so in theory this module could be used for both, but I've not looked at the capabilities of the F2E module from a layer-3 perspective.

Regards

New Member

Fabricpath CE dot1q trunk

thanks steve

853
Views
5
Helpful
4
Replies
CreatePlease login to create content