03-25-2014 01:32 AM
After an upgrade of N1000v from SV1(5.2) to SV2(2.2) , when i started to put the new vem with the new vib file , so i have a mixed of the new vem and the old one i have this message :
%VDC_MGR-2-VDC_CRITICAL: vdc_mgr has hit a cri
tical error: SPROM data is invalid. Please reprogram your SPROM!
the module are now :
Mod Sw Hw
--- ------------------ ------------------------------------------------
1 4.2(1)SV2(2.2) 0.0
2 4.2(1)SV2(2.2) 0.0
9 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
11 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
12 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
13 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
15 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
18 4.2(1)SV1(5.2) VMware ESXi 5.0.0 Releasebuild-623860 (3.0)
19 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
20 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
21 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
22 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
23 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
24 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
25 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
26 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
27 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
28 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
29 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
30 4.2(1)SV2(2.2) VMware ESXi 5.5.0 Releasebuild-1474528 (3.2)
Does anybody know the meaning of the log message. Is something i can do, or the message can disappear after i've completed all the vem ?
Thanks
Federica
Solved! Go to Solution.
04-10-2014 12:27 PM
You are running into the following defect
https://tools.cisco.com/bugsearch/bug/CSCul65853/
The error message occurs during the time aVEM is attached to VSM and can be ignored.
Thanks,
Karthic
04-03-2014 09:39 AM
I am experiencing the same issue, did you get any resolution to this issue?
Thanks,
Joe
04-04-2014 08:54 AM
Hi,
no resolution on that.. The log is stopped after the new vem insertion.. It seems a log from NXOS , properly of an hardware device (7k, 5k), it seems strange on n1000v talking about a reprogramming of SPROM... no commands on that...
Let me know if you resolve the issue.
Federica
04-10-2014 12:27 PM
You are running into the following defect
https://tools.cisco.com/bugsearch/bug/CSCul65853/
The error message occurs during the time aVEM is attached to VSM and can be ignored.
Thanks,
Karthic
04-10-2014 11:36 PM
Thanks Karthic ,
i'm pleased to know that no action is to be done...
Have a good day
Federica
05-09-2015 09:38 PM
Thank you Karthic for sharing such a crucial information with users, 5+ :-)
This information has been captured in Document.
Regards,
Vinay Sharma
Community Manager
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: