Hi,
Can anyone explain the following output on my CIP card:
Router2#sh int ch 3/2
Channel3/2 is up, line protocol is up
Hardware is cyBus Channel Interface
Description: SNA / TN3270E Server for Router 2
Internet address is 10.0.12.1/24
MTU 4472 bytes, BW 98304 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 106/255
Encapsulation CHANNEL, loopback not set
Virtual interface
Last input 00:08:50, output 00:00:16, output hang never
Last clearing of "show interface" counters 00:02:34
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 1459607000 bits/sec, 3405528 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2 packets input, 91 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
11 packets output, 357 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Have a look at the rxload vs th input/output.
Dean
