Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How i can config SNMP on Cisco Nexus 5K?

Hi,

Someone have a configuration guide to enable snmp over nexus 5k.

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions

How i can config SNMP on Cisco Nexus 5K?

To configure SNMP:

snmp-server contact noc@example.com

snmp-server location st. example, 7 - Padova

snmp-server host snmp1.example.com traps version 2c public

snmp-server host snmp1.example.com traps version 2c public

snmp-server enable traps config

snmp-server enable trap link

snmp-server enable trap callhome

snmp-server community public ro

snmp-server source-interface traps mgmt 0

3 REPLIES
Cisco Employee

Re: How i can config SNMP on Cisco Nexus 5K?

Hello,

Keep in mind that SNMP is enabled by default on nexus plataform. What you can do is set username/password and roles for snmp v3, enable traps, community settings, etc.

This is the configuration guide:

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5500/sw/system_management/6x/b_5500_System_Mgmt_Config_602N12_chapter_01110.html

How i can config SNMP on Cisco Nexus 5K?

To configure SNMP:

snmp-server contact noc@example.com

snmp-server location st. example, 7 - Padova

snmp-server host snmp1.example.com traps version 2c public

snmp-server host snmp1.example.com traps version 2c public

snmp-server enable traps config

snmp-server enable trap link

snmp-server enable trap callhome

snmp-server community public ro

snmp-server source-interface traps mgmt 0

4148
Views
23
Helpful
3
Replies
CreatePlease login to create content