I have wan router connected to 2 N7K as cores running 4.2.4 under VPC domain 2 with a vpc11/LACP link to my downstream dual-homed N5k. A Fex2148 hangs off the N5k. Vlan 211 is configured on N7k and N5k and I have a server on the FEX as part of 211.
Their is network connectivity issue and I trace it to the wan router trying to get to the server. On a traceroute from router to server, the packet loops btwn the two N7k and dies.
Per design guide below, I had the impression this should work:
interface Vlan211 no shutdown description ROW4-DC-SERVERS-PRODUCTION ip address 10.100.211.3/24 ip router ospf 1 area 0.0.0.200 ip pim sparse-mode ip igmp version 2 hsrp 211 preempt delay minimum 180 priority 90 timers 1 3 ip 10.100.211.1
interface Vlan211 no shutdown description ROW4-DC-SERVERS-PRODUCTION ip address 10.100.211.2/24 ip router ospf 1 area 0.0.0.200 ip pim sparse-mode ip igmp version 2 hsrp 211 preempt delay minimum 180 priority 110 timers 1 3 ip 10.100.211.1
The unmanaged mode is also known as Network only switching, which is introduced in Brazos release. It adds the flexibility for customer to use only network automation for service appliance.
If a device is configured a...
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...