I noticed I could put the same network on two different vlan interfaces on the internal cisco IOS switch module. The IOS is cgedm.i6km-mz.12.21(22). I tried to do it again and was rejected. Is it an inconsistent bug?
Same network can be configured on two different vlan interface. Can you provide the error message you obtained while the config was rejected along with the network setup which will help in finding a better solution?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...