Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

IP on Mainframe

HI

I need to configure a 7505/4 to receive TCP/IP connections on behalf on the m/f. We will have a cip2 connected to the esconn channel on the m/f. Has any body got any good weblinks showing good practice design and configuration for this. I am looking for good design guides at the moments without success.

TIA

2 REPLIES
New Member

Re: IP on Mainframe

Hi Karl,

There's quite a bit of information on Cisco.com. This is the full design guide -

http://www.cisco.com/application/pdf/en/us/guest/products/ps123/c1225/ccmigration_09186a008007cd59.pdf

Since you're looking for TCP/IP specifically, I suggest you consider using the "packed" CLAW protocol. It provides good performance characteristics for most types of IP traffic, but does require a fairly recent m/f operating system. Updated information on configuring for "packed" can be found here -

http://www.cisco.com/en/US/products/hw/modules/ps2643/prod_bulletin09186a0080091af1.html

and in the standard documentation here -

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpart2/bcfclaw.htm

Rgds, Dan

New Member

Re: IP on Mainframe

Hi Dan

That is spot on - many thanks

Karl

213
Views
0
Helpful
2
Replies
CreatePlease to create content