Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Is 1000Base-T GBIC Supported in Catalyst 6006 now in China?

Is 1000Base-T GBIC Supported in Catalyst 6006 now? If so, what is the hardware/software environment it needs (i.e.1000Base-T GBIC Card type and the CatOS or IOS version)?

  • Server Networking
2 REPLIES

Re: Is 1000Base-T GBIC Supported in Catalyst 6006 now in China?

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

Re: Is 1000Base-T GBIC Supported in Catalyst 6006 now in China?

Software release 7.2 provides initial support for these modules and chassis:

• 1000BASE-TX (copper) GBIC (WS-G5483)

– CWDM-GBIC-1470(=)

– CWDM-GBIC-1490(=)

– CWDM-GBIC-1510(=)

– CWDM-GBIC-1530(=)

– CWDM-GBIC-1550(=)

– CWDM-GBIC-1570(=)

– CWDM-GBIC-1590(=)

– CWDM-GBIC-1610(=)

• Cisco 7606 Internet Router (6 slots)

• 32-MB and 48-MB Flash PC cards

So I assume you need 7.2.x if you want to use the 1000BaseT GBIC (WS-G5483)

142
Views
0
Helpful
2
Replies
This widget could not be displayed.