Re: Is portfast enabled on a 15/1 port on 6006 MSFC normal?
Yes this is normal.
The default value for portfast is "disabled" for all ports. Nevertheless, module 15 is the MSFC port which uses an internal connection to the switch bus and then, reasonably I think, the portfast is "enabled".
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...