Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ISP Links Load Balance

Is there any cisco product/solution capable to do ISP links load balance without utilization of BGP?

Thanks

Wesley

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: ISP Links Load Balance

5 REPLIES

Re: ISP Links Load Balance

Hi

Can you revert back on the IP Address Space being used in both Internet router 1 and Internet router 2 ?

Its preferred to run BGP with the SP so that the redundancy can be taken care automatically.

Also due to some internal routing policies SPs may not entertain running redundancy with static routes..

regds

Community Member

Re: ISP Links Load Balance

Hi

Thanks for your response!

In fact, the client don't want use BGP in the network and I'm looking for another solution with automatic redundancy.

What do you think in using OER in the edge routers with the master controller in the edge router 1? In this case, the firewall will be in failover mode.

http://www.cisco.com/en/US/products/ps6628/products_ios_protocol_option_home.html

Is there another solution?

Regards

Community Member

Re: ISP Links Load Balance

Hi,

Radware is providing the equipment for load-balancing internet lines from different SP.

You can use the device "Radware: link-proof"

Cisco doesn't have similar equipment.

Regards

Pravin Patil

Community Member

Re: ISP Links Load Balance

Community Member

Re: ISP Links Load Balance

Hi,

If you are running sensitive applicaion U can use Linkproof from RADWare or use BIGIP Link Controller. Both these products do fantastic traffic shapping and bandwidth management and are easy to manage.

176
Views
12
Helpful
5
Replies
CreatePlease to create content