Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Limit Bandwith

Hello, i search to limit bandwith on cisco 2950 switch.

I know that i can fix the bandwith to 10 or 100 Mb but i want to define it to 1Mb for example.

Thanks for your help.

2 REPLIES
Purple

Re: Limit Bandwith

Hi,

You need to use policing in order to accomplish that. However, there is a limitation on 2950 switches in that you cannot police in the egress direction.

Th following link has more details on how you can police on ingress:

http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a00800d84c9.html#xtocid22

Hope that helps - pls do remember to rate posts that help.

Paresh

Bronze

Re: Limit Bandwith

To do any form of rate-limiting or policing, you have to use an EI version of the 2950. While it is just an image upgrade on a 3550, the 2950 requires different hardware to implement similar features.

202
Views
0
Helpful
2
Replies
CreatePlease to create content