Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LISP, UCS, CSR100V, and Customer prem networks

In a traditional setup where you have servers in a data center, and servers at a customer site, using two routers setup as a bridge, you can extended their vlans across the WAN.

However, UCS throws a monkey wrench into this since the servers are now virtual, on a virtual switch, and in an MPLS environment to boot. 

So let say you have UCS configured as multitenant, and access to each tenant is done through a series of port channels. Well you cant stick a router in front of it to bridge the vlans, so my question is,

Does LISP do the same thing and can it be done with a CSR1000V premium license on the VM and a 2921 on the customer prem, and are there any decent examples of such available?

Are there any alternatives, of just run the CSR100V and configure a bridged network?

268
Views
0
Helpful
0
Replies