We are having two links 4 mbps and 2 mbps, and we are running OSPF on these lines. How do we load balance on these lines ? As per bandwidth . That is 75 % of data should flow on 4 mb line and 25 5 should flow on 2 mb line. Is such balancing possible on OSPF process.
I don't think you will be able to do that (75% & 25% load on the links) with normal ospf config.
But you can try out configuring Multilink by bundling both the links so that you can expect even load balancing on the bundled links.
If you are having ethernet drop on your 4 Mbps then you wont be able to bundle the links..
Also if you are having 4 Mbps as ethernet drop then you can try doing backup interface and backup load command which will point your 2 Mbps link as your secondary and also forward traffic onto the secondary link once you have 75% utilizations on the primary link..
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...