lu session not goes up

[dominique.dorr]

hello

i sent you my config to explain more easy a Problem

I configured these functions on a router 7505 attached escon

Tn3270

hpr/ip

snasw

All PU's are active

name(index) ip:tcp xid state link destination r-lsap

PUPOOLTS(1) 10.126.197.68:3333 0C655555 ACTIVE tok 0 4000.2000.0001 04 10

PUTEST(2) 10.126.197.68:3333 0C610001 ACTIVE tok 0 4000.2000.0001 04 08

PUTEST2(3) 10.126.197.68:3333 0C610002 ACTIVE tok 0 4000.2000.0001 04 04

PUC66666(5) 10.126.197.69:3333 0C666666 ACTIVE dlur INDOSUEZ.PUC66666

Lu's attached at PUPOOLTS,PUTEST, PUTEST2 can establish a session with an application

Lu's attached at PUC66666 under DLUR can't establish a session with an application.

Here is a status

lu name client-ip:tcp nail state model frames in out idle for

2 TE666660 10.126.252.234:2454 N P-BIND 3278S2E 6 6 0:31:3

i attached my configuration

is my configuration is correct.

could we work in hpr/ip sansw with dlur ?

Thank for your help

Best regards

[jmollman]

Cascanding DLURs is not allowed. You can not connect the tn3270-server DLUR to SNASw then to VTAM.

[dominique.dorr]

thank for your help.

Rgds

[romney]

Hi Dominique,

snasw automatically includes dlur capability within itself. You have configured dlur in tn3270 as well, which is part of your problem. You have also tried to use snasw vdlc ports in addition to snasw vtok ports. Please use your CCO id to look at the sample tn3270/snasw configuration at http://www.cisco.com/en/US/partner/tech/tk331/tk336/tech_digest09186a0080091af1.html#wp724553 and see if that doesn't answer your questions.

- Ray

[dominique.dorr]

hello Ray

Thank for your help, i tried to work with DLUR because in snasw i saw that LU's name defined under a PU doesn't corresponding at the VTAM LU definition.

I must work with the LU name definied in VTAM, for security reason.

Best regards

Dominique

[romney]

Hi Dominique,

you can't define PUs or LUs in snasw ... the PU or LU name is learned from the VTAM definition when the ACTPU/ACTLU is sent to the snasw dlur. I don't know all the details of PU/LU names with respect to tn3270 (perhaps Jim can comment?) In the sample I pointed you to there were no LUs named, so they would be learned from the VTAM definitions.

- Ray