Cisco does not provide a rack-mount kit for Cisco MCS 7815-1000 server. You can order a rack-mount kit for the Cisco MCS 7815-1000 from IBM. The part number is 4Ux20D conversion kit for an xSeries 200 Server. This kit will mount the Cisco MCS
7815-1000 Server in an industry-standard 19-inch rack that confirms to EIA-310-D standards with a depth of at least 28 inches. Also, adequate space (approximately 2 inches for front bezel and 1 inch for air flow) must be maintained for the slide assembly to the front door of the rack cabinet to allow sufficient space for the door to close and provide adequate air flow.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...