Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

N5K-C5548UP-FA and N55-DL2

Hello , in order to prepar spare parts , i list the needed parts requested for a particular network devices list .

With Nexus N5K-C5548UP-FA , a module N55-DL2 is present on the device , but i do not find any part reference on the CCO .

After some seach i found only the layer3 module is are labeled with a PID and the lyer2 ( n55-dl2) is not labelled .

So as the L3 module is plugged by removing the l2 module , does that means the l2 module is the default module ? and is delivered with the chassis by default ?

Is someone can confirm ?

Rgds.

Hubert.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

N5K-C5548UP-FA and N55-DL2

Hello Hubert..

You are correct.. N55-DL2 is default module unless you have a L3 module

Thanks

-Prashanth

2 REPLIES
Cisco Employee

N5K-C5548UP-FA and N55-DL2

Hello Hubert..

You are correct.. N55-DL2 is default module unless you have a L3 module

Thanks

-Prashanth

N5K-C5548UP-FA and N55-DL2

Hi Prashanth , than you very much for your clarification . Have a nice day .

Rgds.

Hubert.

1406
Views
0
Helpful
2
Replies