Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

N5K to WS-X6708-10G-3C not coming up

Strange one really, and a little embarassing at the same time...

- Two N5K's with 4 x 10G connections to VSS

- Using OM3 multimode

- 2 meters distance

- X2-10GBASE-SR tranceivers on the 6509's

- Basic port configurations

- Swapped out tranceivers

- Checked fibre pairs are around the right way

- N5K's are connected to one another

The interfaces will not come up!

It's not like i'm new to all this kind of thing, but im seriously stumped as to why I cant get any joy.

Ideas? Anyone?

2 REPLIES
VIP Super Bronze

Re: N5K to WS-X6708-10G-3C not coming up

Hello Paul,

Does show module on the 6500 show that the blade is ok?

If none of the ports comes on line you may have a bad blade.

What if you connect the 6500 ports to another device?

HTH

Reza

New Member

Re: N5K to WS-X6708-10G-3C not coming up

Thanks for your reply Reza.

Ports on the blades are being used for uplinks to other devices, so they seem to work fine.

610
Views
0
Helpful
2
Replies