Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

need helip for data center designing

Sir ,

I am going to design a data center where the following equipments are the

1. one router 7609

2. two core switch (WS-C6509-E)

3. two firewall (WS-C6506-E, with Firewall blade)

4. one VOICE ROUTER (CISCO2821with PVDM2-64, VWIC2-2MFT-T1/E1, PVDM2-32)

5. one Remote Access Server (AS5400XM, AS5000XM 60 Dial Port Feature Card, AS5400 Octal E1/PRI DFC card)

6. two CALLMANAGER-5.1

7. multiple no of Cisco IP Phone 7940G with Video Advantage with VT Camera II

8. one Gatekeeper (2811)

9. one Internet Router (3845)

10. one Authentication, Authorization and Accounting (AAA) System

11. one ISDN RAS 2811 with2-Port Channelized E1/T1/ISDN-PRI Network Module with video conferencing (polycom)

12. one Network Intrusion Detection/ Prevention System (NIDS)

13. one NMS

14. one Content Switch for Server Load Balancing

15. multiple Video Phone

16. lots of sever ( mail. Web, storage, etc )

17. polycom MGC 100

18. polycom 7000

also 20 no of 7206 VXR will be connect with 7609 router through lease line

so.. if u send me some link or some sample design and share some advice where I can gather some idea to design this data center in a proper way




Re: need helip for data center designing

IMO opinion the best place to start is by reading the SRNDs. They can be found here-

Hope that helps.

CreatePlease to create content