I would like to know if any others have had similar issues and what they did to resolve.
I have a pair of 6509 functioning as access switches. The 6509 connect to a number of IBM 595 cabinets. I recently rebooted the 6509. After the reboot, several network connections begin bouncing (up/down every second). After further investigation, the bouncing interfaces connected to a VIO server in the 595 cabinet. The only way to resolve the issue was to power off then on the VIO server.
The 6509 interfaces have been configured as an access switchport assigned to a VLAN. Multiple virtual servers connect to the VIO server which in turn connects to the physical NIC and the 6509.
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...
RBAC users like firstname.lastname@example.org may fail HX Connect login. At that time, "Incorrect user name or password(100005)" is shown as a failure reason.
RBAC users can login to vCenter server. So, RBAC username and passwo...