We want to test in our labo a Nexus1000V solution based on two ESXi standalone nodes with a VEM installed on each one. On the same nodes we would like to install in a redundant way the VSM, it's not yet the final infrastructure since another possibility is to use a dedicated ESXi node for the VSM
My questions are the following:
Does the VSM support only 64bit VM??? There are no chance to install it on a 32 bit VM only for testing purposes
Same question as the one before but regarding the VEM...
which is the best solution having the VMS on the same node as the VEM or on a complete separate node?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...