we have two HP Flex-10 module in c7000 chassis connected to the HP Storag array with HP SAN Switch and two nexus 5048P.
me question is about the configuration between flex-10 and nexus 5K,is using vPC and trunk link to the flex-10 will be enough, i find some configuration example in the internet talk about vsan and zonning concept ,so if we use hp san switch it will be no storage configuration in the nexus ?
here an example of configuration that i find :
Configuring Port-channel linked to Virtual-Connect
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...